Skateboarding and longboarding in glasses: seven things to sort before you drop in
Skateboarding has a big weekend following in the Philippines. Sessions fill up parks and plazas in Metro Manila, Cebu and Davao, and plenty of the riders wear glasses. You need to see the coping, the crack in the pavement and the kid cutting across your line. You also fall, sweat and ride under hard afternoon sun. Here is what to sort out before you drop in.
1. Accept that you will fall, and plan for it
Falling is part of learning a trick. Glasses can fly off, bend, or press into your face when you land. Ordinary glasses are not designed as protective eyewear. We do not have a named impact-rated lens on our menu yet, and we would rather tell you plainly than pretend. Ask the team about the toughest material for your frame, and treat your glasses as something that helps you see, not something that protects your eyes.
2. Wear a helmet, and check it fits with your glasses
A helmet protects your head; it is the first piece of gear to buy. Try it on with your glasses. The helmet straps and padding should not push the temples into your head or shove the frame down your nose. If they do, a slimmer frame with thinner temples usually solves it.
3. Get a frame that stays on
A frame that slides when you look down at your board is a distraction and a hazard. Look for these features.
- A snug fit across the bridge, with adjustable nose pads that grip without pinching.
- Temples that wrap gently behind the ears.
- A lighter frame, so momentum does not throw it off when you bail.
- A sports strap for sessions where you are trying new tricks.
Bring the frame in for a free adjustment before your session. A well-fitted frame stays on far better than a loose one.
4. Deal with sweat and humidity
Philippine afternoons are hot and humid, and sweat runs straight onto lenses. Smudged, streaky lenses scatter light and make it harder to read the surface. Carry a microfiber cloth in your pocket. Rinse salt and sweat off with clean water before wiping, so grit does not scratch the lens. Do not wipe with your shirt mid-session.
5. Handle the sun
Skating at 4 p.m. means low sun in your eyes and glare off concrete. You have two routes.
- Light-adaptive lenses darken outdoors and clear indoors, so one pair covers the ride to the park and the session itself.
- A separate prescription sun pair if you skate mostly in full sun.
Polarized lenses cut glare off wet surfaces and water. On dry concrete the gain is smaller, and some riders prefer not to lose detail on surface texture. Try both if you can.
6. Consider contact lenses for sessions
Many skaters wear contact lenses to ride, then switch back to glasses. Contacts stay put in most falls and give you full side vision. They need a proper contact lens fitting, because the contact lens prescription is different from your glasses prescription. Pair them with non-prescription sunglasses that fit under the helmet. Wash your hands before handling lenses, which is harder at a skate park than at home, so plan for it.
7. Watch for warning signs after a fall
If you hit your face or head and notice new floaters, flashes of light, a shadow across your vision, double vision, eye pain or blurred vision that does not clear, stop riding and get it checked by an eye care professional promptly. Do not wait to see if it settles.
Where to start
Book a Vision7 eye test at your nearest Vision Express store. The seven-step exam checks your distance vision and how your two eyes work together, which matters when you are judging speed and distance on a board.
Then ask for Opulens Ultra 1.60 at the counter. It is the in-stock lens on our menu we point to for humidity, sweat and smudges, and it is ready in about 20 minutes, so you can have a fitted pair the same afternoon. For sun sessions, ask about Essilor Transitions Classic HMC 1.56, which darkens outdoors and is ready in one to two days.
Every pair comes with free lifetime ultrasonic cleaning, free lifetime custom fitting and adjustment, and a 1-year warranty. Bring your glasses back after a bad bail and we will check, adjust and refit them at no cost.






Leave a Comment